Photo of AIRTAC VFC Scar-H / VFC M110 to SR25 HPA Adapter in RIF
Photo of AIRTAC VFC Scar-H / VFC M110 to SR25 HPA Adapter
Photo of AIRTAC VFC Scar-H / VFC M110 to SR25 HPA Adapter with mag
Photo of AIRTAC VFC Scar-H / VFC M110 to SR25 HPA Adapter in RIF
Photo of AIRTAC VFC Scar H/M110 HPA Adapter Modular Base

AIRTACUK

VFC Scar-H / VFC M110 to SR25 HPA Adapter (Modular)

$153.00

Earn [points_amount] when you buy this item.

T1P Dead Drop Grip Icon

T1P Dead Drop Grip Compatible Run your HPA line seamlessly from your adapter into your rifle's grip Click to learn more

Quantity:
In stock

A fully printed VFC SCAR-H magazine top with an AEG/Shotshell magwell prefitted! This adapter requires a donor gas router from a VFC SCAR-H magazine. Valve and feed lips are provided.

To fit the gas router, remove the 4 screws and pin from the top of the adapter, lift the feed lips, place the gas router underneath, and refit the feed lips.

You can run the adapter at 120-150PSI.

We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto.

US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment)

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE