VFC SCAR-H / VFC M110 HPA ADAPTER MODULAR BASE - PLUG AND PLAY

A fully printed VFC SCAR-H magazine top.

PLUG & PLAY - Comes pre-fitted with valve, feed lips and gas router - you do not need to use any donor parts. No assembly is required.

Available with a magwell fitted here

To fit the gas router, remove the 4 screws from the top of the adapter, lift the feed lips, place the gas router underneath, and refit the feed lips.

You can run the adapter at 120-150PSI.

We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto.

US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment)

*Drum mag not included with drum base. You can purchase drum here.

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE