Photo of AIRTAC VFC G36 to M4 HPA Adapter in RIF
Photo of AIRTAC VFC G36 to M4 HPA Adapter
Photo of AIRTAC VFC G36 to M4 HPA Adapter with mag
Photo of AIRTAC VFC G36 to M4 HPA Adapter in RIF
Photo of AIRTAC VFC G36 HPA Adapter with rifle style shotgun shell base in RIF
Photo of AIRTAC VFC G36 HPA Adapter with rifle style shotgun shell base
Photo of AIRTAC VFC G36 HPA Adapter with rifle style shotgun shell base in RIF

AIRTACUK

VFC G36 MODULAR HPA ADAPTER - PLUG AND PLAY

$147.00
Airtac 'Flat Top' Modular Adapter Base (Style):M4 Base
Quantity:
In stock
A fully printed VFC G36 magazine top with an AEG/Shotshell magwell prefitted!
PLUG & PLAY - Comes pre-fitted with valve, feed lips and gas router - you do not need to use any donor parts. No assembly is required.
Initial insertions will be tight, you can manually manipulate the G36 mag catch to engage.
You can run the adapter at 120-150PSI.
We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto.

US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment)

 

 

 

*Drum mag not included with drum base. You can purchase drum here.

 

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE