AIRTACUK
GTP9/SMC9 to MP5 HPA Adapter
WE CAN BUILD THIS ADAPTER FOR YOU - Please check our gas magazine section for the gas magazine or parts you require. If you add these to your cart, we can build your adapter for you
If unavailable, we provide magazine / feed lip install instructions here
GTP9/SMC9 to MP5 HPA Adapter
Open Mon-Thu 4-6pm
Unit 27/28
Ballymena Business Centre
Galgorm BT42 1FL
United Kingdom
These adapters are made to fit your existing GBBR magazines, and include a single stack adapter, and BB retention mechanism to reduce BB loss during mag changes.
Full support and warranty is offered for these products. They are designed and manufactured by ourselves and our UK manufacturing partner.
Designed and tested with the CYMA MP5 Mid-Caps listed on our website.
Assembly
Installation is dead simple, you’ll need a quick grip vice such as this, a pin punch (2mm), basic screwdriver set and a hammer or mallet.
1) Punch out the bottom pins on the sides of the gas magazine to remove the gas block.
2) Punch out the small pin that retains the follower at the bottom of the gas magazine
3) Insert the single stack adapter into the gas magazine
4) Fit the gasket to the Airtac HPA adapter (at this stage you can apply some silicone oil to the gasket to aid insertion )
5) Place the HPA Adapter into the magazine, and into the clamp. Tighten the clamp until the pin holes line up, and gently hammer them in
8) Go have fun!
MP5 HPA Adapter Info
- Replaceable Feed Tube
- Replaceable Feed Tube
- Compatible with all CYMA MP5 Mid Caps (65 round metal, 120/130 round metal, Straight, Novritsch Straight, Bullet Window). Available Here
- Straight Magazines will follow grip of pistol/SMG
- Small rear tabs can be filed down to accomodate out-of-spec magazines (shown in blue on image below)
- BB Retention drops only 2 BBs when changing magazine
- Magazine Insertion will be tight for first few insertions, this is to provide perfect fit
Newer MP5 adapters include changeable shims, which can be removed with the included hex key.
- NO SHIM - CYMA 65RND (SHORT CURVED)
- S1 SHIM - CYMA 110RND (STRAIGHT)
- S2 SHIM - CYMA 130RND (PLASTIC CURVED WITH BULLET DETAIL/120 RND METAL CURVED