Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with black base in RIF

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with purple base in RIF

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with raw anodized base

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with green base

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with black base

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with red base in RIF

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with blue base in RIF

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with red base

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with gold base

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with raw anodized base in RIF

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with purple base

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with blue base

Photo of AIRTAC X T1P Hi-Capa/SSP5 Shotgun Shell Adapter with gold base in RIF

Photos of T1P Hi-Capa Shotgun Shell Adapter with raw anodized CNC base and in RIF

Photos of T1P Hi-Capa Shotgun Shell Adapter with purple CNC base and in RIF

Photos of T1P Hi-Capa Shotgun Shell Adapter with red CNC base and in RIF

Photos of T1P Hi-Capa Shotgun Shell Adapter with gold CNC base and in RIF

Photos of T1P Hi-Capa Shotgun Shell Adapter with black CNC base and in RIF

Photos of T1P Hi-Capa Shotgun Shell Adapter with blue CNC base and in RIF

NOVRITSCH SSP5 SHOTGUN SHELL HPA ADAPTER - PLUG AND PLAY

$150.00

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

T1P CNC Hi-Capa Shotgun Shell Baseplate (Color):

Variant

Quantity:

Only 6 units left

COMES WITH AN UPGRADE NOZZLE SPRING REQUIRED TO FEED FROM SHELLS

We’ve replicated a Hi-Capa magazine, and adapted it to take HPA, fed by 30 round shotgun shells.

Easy access, yet low-profile magazine release at the rear of the adapter.
CNC Aluminium magazine baseplate with a choice of colours adding flair to your build!
BB latch to prevent dropped BBs on reload (0 BBs are dropped when an empty shell is ejected).
High internal volume for good FPS/PSI.
Works best with CYMA Shotgun shells, available on the website.
US Style Fitting as standard. EU Fitting available here

The adapter comes with a 15cm airline, which can be cut down to your preferred size, and a blackened Foster 22 (US Style) connector fitted.

PLUG AND PLAY - We've injection moulded our own gas router for this adapter, and combined it with our high flow valve and printed feed lips. This means no more donor mags!

This adapters magazine catch is adjustable, allowing you to move the adapter up towards the nozzle of your gun for better cycling / stronger air seal. Included are 3 magazine catch cutout shims, marked 1 2 and 3. 1 is the 'lowest' and 3 is the 'highest' seal against the nozzle. They can be changed by removing the small screw in the side of the adapter which holds the shim in place. This can be useful for grips that are a bit out of spec.

You will also be provided three feed tubes of different lengths. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results. This video demonstrates how simple this is:

You will likely find that sites that do not usually allow HPA adapters in pistols, will have no problem with these adapters, due to their low capacity, and covert profile.

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE