AIRTAC AT200 HPA Regulator - AIRTACUK

AIRTACUK

AIRTAC AT200 HPA Regulator

$97.00

Earn [points_amount] when you buy this item.

Quantity:
In stock

Specced to a wider PSI range (0-200PSI) which better suits some of our lower volume compact adapters as well as all HPA engines on the market.


As we sell a lot of regs we’ve learned what the market needs and figured out common pitfalls - we specced our own from the factory with a bunch of features / changes that have led to something more reliable at a great price point. It also comes with a spare key and lid, meaning if you lose them, you can still get through chrono and tournament locked!

Additionally as it has our name on it, it carries our lifetime warranty! We'll also happily service these regulators for you whenever you need
  • Dual Output (1/8 NPT Female)
  • Tournament Lockable
  • Input Pressure: 450-900PSI
  • Output Pressure: 0-200PSI
  • Fully Serviceable
  • High Refresh Rate
  • Includes US Style Foster 22-2 Fitting (Installation instructions are in the box but can also be found here)

APPLICABLE TO ANY AIRSOFT REGULATOR USED WITH ANY HPA TANK 

When fitting a secondary regulator (e.g. Wolverine Storm Cat5, Airtac AT200, Balystik HPR800C) to a HPA tank, do not overtighten the secondary regulator. Fit the secondary regulator to the HPA tank when the tank is full. Tighten the regulator until it pressurises, or stops freely rotating. You do not need to use force to achieve a seal. 

If your secondary regulator 'binds' with your HPA bottle (due to over torquing of the secondary regulator, dirt etc) have the bottle emptied by a professional, or use a tank emptying tool. Grip the primary regulator of the bottle by the bonnets wrench flats, and then unscrew the secondary regulator from your tank. This is to avoid applying excess torque to your primary regulator, and to avoid unscrewing the primary regulator while pressurised.