VFC MP5 to MP5 AEG HPA Adapter - 2026 Edition
Choose options
Updated 2026 edition with high-quality CNC MP5 magwell
This adapter lets you run your VFC MP5 on HPA, fed by any CYMA MP5 midcaps.
Requires a donor gas router from a VFC MP5 magazine. Valve and feed lips are provided.
We are releasing a VFC MP5 gas router in the next month, which will be provided free of charge (just pay shipping)
To fit the gas router, remove the 4 screws from the top of the adapter, lift the feed lips, place the gas router underneath, and refit the feed lips. Be careful not to over tighten the screws
You can run the adapter at 120-150PSI. We recommend 150PSI for this adapter due to its smaller internal volume.
The MP5 magwell has a rear shim held in by two screws. This can be removed to allow fitment of curved CYMA MP5 mid-caps. Leave it in place for straight MP5 mid caps.
We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto.
US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment)
DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE
MP5 HPA Adapter Info
- Replaceable Feed Tube
- Replaceable Feed Tube
- Compatible with all CYMA MP5 Mid Caps (65 round metal, 120/130 round metal, Straight, Novritsch Straight, Bullet Window). Available Here
- Straight Magazines will follow grip of pistol/SMG
- Small rear tabs can be filed down to accomodate out-of-spec magazines (shown in blue on image below)
- BB Retention drops only 2 BBs when changing magazine
- Magazine Insertion will be tight for first few insertions, this is to provide perfect fit
