This adapter lets you run your VFC MP5 on HPA.

Requires a donor gas router from a VFC MP5 magazine. Valve and feed lips are provided.

To fit the gas router, remove the 4 screws from the top of the adapter, lift the feed lips, place the gas router underneath, and refit the feed lips. Be careful not to over tighten the screws

You can run the adapter at 120-150PSI.

We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto.

US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment)

*Drum mag not included. You can purchase drum here.

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER. ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS). CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER. NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS. NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE