VFC G36 MODULAR HPA ADAPTER

A fully printed VFC G36 magazine top with an AEG/Shotshell magwell prefitted!

This adapter requires a donor gas router from a VFC G36 magazine.

Valve and feed lips are provided.

To fit the gas router, remove the two screws and pin from the sides of the adapter, lift the feed lips, place the gas router underneath, and refit the feed lips.

Initial insertions will be tight, you can manually manipulate the G36 mag catch to engage.

You can run the adapter at 120-150PSI.

We utilise a very high flow valve. This has allowed us to build a far more reliable adapter that is capable of high FPS and sustained full auto.

US Style HPA Fitting as Standard (most common fitting across industry - compatible with all AIRTAC HPA equipment)

Your adapter will come with a number of shims that can be used to ensure snug fitment of your M4 magazine.

*Drum mag not included with drum base. You can purchase drum here.

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE