T1P CNC Angled HPA Adapter

This CNC Aluminium HPA adapter lets you run M4 AEG mags with your Hi-Capa pistol. The adapter holds the AEG M4 magazine "out of the way", allowing you to crawl lower, peek tighter and obviously, look cooler!

With a wide range of coloured tops, bases and catches, you can customise the adapter to suit your build.

All you need to do is:

1. Choose your top

2. Choose your mag catch

3. Choose your base

BB Retention
Single Stack included
Gas Magazines Tested: TM 5.1, TM4.3, WE5.1, Novritsch SSP5
Works best with PTS "EPM" Class of Magazines
CNC magazine catch is easily reachable by both hands.

To fit this adapter to your gas magazine,

First unscrew and remove the feed tube block from the adapter using a 1.5mm allen key.
Remove the gas block from your mag by taking off the baseplate and using a screwdriver to unscrew the gas block
Install the single stack from the adapter install kit into your gas magazine's feed path
Place the O-ring from the included install kit onto the top of the adapter
and fit the magazine onto the adapter.
Screw the magazine onto the adapter using the provided screw

The adapter also comes in our T1P hardcase for ultimate protection.

*Some photos have a GLK/AAP top - this is to show the colours available. Adapters will ship with the correct top.

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE

AIRTACUK

T1P CNC Angled HPA Adapter - HI-CAPA/SSP5