HYP-AR - HYP-556 MWS HPA RECEIVER - FOUNDERS ACCESS - AIRTACUK
HYP-AR - HYP-556 MWS HPA RECEIVER - FOUNDERS ACCESS - AIRTACUK
HYP-AR - HYP-556 MWS HPA RECEIVER - FOUNDERS ACCESS - AIRTACUK
HYP-AR - HYP-556 MWS HPA RECEIVER - FOUNDERS ACCESS - AIRTACUK

HYP-AR - HYP-556 MWS HPA RECEIVER - FOUNDERS ACCESS

£329.99
Receiver Type:

Receiver Type
Cerakote:

Cerakote
Type:

Type
Quantity:
In stock

CNC Machined from 7075 Aluminium at our state-of-the-art production facility in Northern Ireland, the HYP-AR is our magnum-opus to HPA GBBR in airsoft. 

Integrated HPA, Native Controls. The HYP-AR lower receiver is designed around PTS EPM M4 magazines, and will transform your MWS into a HPA-powered blowback monster.

For AEG EVO magazines and bolt lock, check out the HYP-9

You are a founder of this product.

You are purchasing from BATCH 1 - If you choose to purchase this kit, you must send your replica to us so we can install it. You will receive all spare parts back with your completed replica. No irreversible work is undertaken; we just swap the parts out from your lower, and test.

Make sure to include your contact number and email at checkout, as we will use these to contact you.

When we reach out to contact you, you must send in your MWS along with a copy of your order number to:

Unit 27-28 Ballymena Business Centre, Galgorm, Co. Antrim, BT421FL, Northern Ireland

Cerakote

If you choose a custom cerakote colour, let us know at checkout via order notes.

You can choose from any H series coating for your lower receiver.

https://www.cerakote.co.uk/product-category/cerakote-coatings/h-series-coatings/

PICTURES SHOW PROTOTYPES - FINAL CERAKOTE AND MACHINING WILL BE HIGHER QUALITY

FAQ

The kit includes pivot pins (front and back), recoil spring/buffer retention lock, mag release, and all relevant HPA innards prefitted.

An AIRTAC MOE Grip is included, and the airline is pre-routed through for your convenience.

You will need to fit an MWS trigger box, fire selector, and stock (receiver has standard MWS spec buffer tube threads). All of these can be taken from your donor MWS or purchased separately.

We offer a lifetime warranty against manufacturing defects. This covers material and workmanship issues but does not cover normal wear or misuse.

The HYP-AR lowers for Double Eagle and Tokyo Marui replicas are different to one-another because the factory DE and TM lowers are not exactly the same.

TM uppers will fit the DE cut receiver (with visible gaps), but DE cut receivers will not fit the TM receiver.

We have explicitly tested multiple Noveske N4s and Ghetto Blasters. Anything with a 'full sized' MWS bolt should work (e.g. Salvo Precision MCX with its compact bolt will not)

We have explicitly tested the URG-I and MK18. It is likely all Tokyo Marui MWS will be compatible due to TM's adherence to standards.

AIRTAC Adapters

Each of our adapters is designed to be low profile while reaching field limit FPS. We design and manufacture all of our products to the highest standard, and do not charge extra for ‘premium’ features. Where applicable this adapter features:
  • Lifetime Warranty (Our adapters have to be built to last)
  • Injection moulded or CNC magwell that is impervious to BB strikes at point blank skirmish FPS.
  • CNC or Injection moulded Feed Tubes and Magazine Catches for lifelong durability.
  • Tuneability/compatability via integrated shim systems. Our adapters are designed to cope with 'airsoft tolerances'
  • Gas Routers injection moulded from NBR, 1:1 with the factory gas router.
We test every HPA adapter we sell
  • Seal Test
  • Firing test, for feed and recoil (we have over 100 guns on site for testing)

Key Information

  • We use a US Foster Fitting as standard. This is the most common airsoft HPA fitting. EU fittings can be purchased separately.
  • Some of our HPA adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.
  • If you need higher FPS, you can:
    • Fit a tighter barrel
    • Use a longer barrel
    • Use heavier BBs
    • Fit an improved hop bucking
  • If your replica has an NPAS fitted, we advise opening it fully.
  • Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
  • Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.
DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER. ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS). CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER. NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS. NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE